Tenga - Cup Warmer (Black)

Meet the Cup Warmer (Black), an USB-powered warming accessory for compatible TENGA CUP products. An aluminium heat-conduction core warms from the CUP entrance toward the closed end, with high and low modes, LED readiness indication and automatic shutoff.

It uses dedicated USB power while operating. Only materials supported by the exact product record are carried into the listing. This exact listing remains tied to its stated texture, firmness, colour and compatibility rather than borrowing specifications from a newer or different TENGA model.

Key Benefits

• USB-powered warming accessory for compatible TENGA CUP products
• An aluminium heat-conduction core warms from the CUP entrance toward the closed end, with high and low modes, LED readiness indication and automatic shutoff.
• Reusable construction when maintained according to the exact material and care instructions
• Dedicated USB power supports consistent warming without an internal battery
• Compatibility: Compatible TENGA CUP models listed by TENGA; not for FLIP products

1. Confirm the CUP model appears on TENGA’s compatibility list; FLIP products require a different warmer.
2. Fit the heat stick and base as directed, connect the dedicated USB cable and keep every connector dry.
3. Slide the compatible unopened or prepared CUP over the warmer without forcing the fit.
4. Hold the touch switch to power on and choose high or low mode.
5. Wait for the LED to show readiness, then check the temperature throughout the CUP before body contact.
6. Power off and remove the CUP before applying lubricant or beginning use.

• Disconnect or switch off Cup Warmer (Black) before cleaning.
• Wipe the powered housing with a barely damp cloth and do not submerge it.
• Keep liquid and cleaner away from the USB plug, battery compartment, motor connection and adaptor.
• Dry every surface fully before reconnecting power or attaching another product.
• Inspect cables, seals, clips and fittings for damage and stop use if any part is loose or cracked.
• Store disconnected, without sharp bends in the cable or pressure on the heat stick, clip or adaptor.

Is Cup Warmer (Black) suitable for beginners?
Beginner-friendly as an accessory, provided it is attached only to a confirmed compatible TENGA product and tested before body contact.

Which products fit Cup Warmer (Black)?
It is designed for compatible TENGA CUP models listed by TENGA. It is not for FLIP products, which use a different warmer.

How do I know when the CUP is ready?
The LED changes from blinking to steady when the target temperature is reached. Always check the temperature through the full CUP before body contact.

Is a TENGA CUP included?
No. This listing is for the warmer, outer case, dedicated USB cable and power adaptor; the CUP is sold separately.